How to use the phone in My Winter Car

The phone is perhaps the single most important item to use in My Winter Car, and it will help you expand your snowy adventures.

When you wake up at your apartment for the first time, you’re likely to miss spotting the telephone at all. This guide will lay out all the steps required for you to first find the telephone and then use it properly to get different jobs.

How to find the phone in My Winter Car

The phone is relatively easy to find, but it’s also possible for you to miss it. You can find it in the starting apartment, next to the front door. The phone is placed on the chair, and you can use it from there. When you find it for the first time, the phone won’t have much use.

How to use the phone in My Winter Car

First, interact with the phone to activate it if you want to make a call.

• You’ll need to find numbers that are located at the different POIs. For example, the job recruitment board at the Gas Station will provide you with numbers.
• Once you have found a number, use the numpad keys to enter it.
• Don’t use the numbers on the top row.
• While inputting the numbers, make sure there are no pauses.

If you have inserted a number correctly, it will connect automatically. An NPC will pick up, which will be followed by a conversation. You can also disconnect the call, but it’s advisable to wait for the NPC to do so. Ending a call prematurely might prevent an objective from working normally.

If you don’t use the numpad, the phone won’t work. You’ll hear a beeping sound coming from the phone. Put down the phone, and interact with it again to enter the number. Once done, the call will automatically connect with the applicable NPC.

You’ll need the phone for doing almost anything inside the game, like finding your project car or getting jobs like driving a taxi.

The post How to use the phone in My Winter Car appeared first on Destructoid.

The Firewood Cutter, aka the Lumber Conveyor, is an exceptional tool if you’re looking to sell and cut Firewood in My Winter Car.

This item can’t be used on its own, and you’ll need to use the tractor to do so. However, the job is easier said than done, and this guide will help you become a woodcutter in a few simple steps.

How to use the Lumber Conveyor in My Winter Car

The first task is to connect the Cutter to the Kekmet. It’s impossible to move the Lumber Conveyor from its stationary position without attaching it to your tractor. Hence, drive the tractor carefully and place it very close to the Conveyor. Keep the distance as minimal as possible, or else the alignment will be loose, and logs will fall.

You’ll find the rear hitch lever on the right side of the Kekmet. Use it to lower the attachment arms from the rear of the tractor. Get down, and click the connection point on the cutter (once the attachment arms have been lowered). If aligned properly, the cutter will connect with the Kekmet.

Next, use the PTO lever located to the left of the steering wheel of the Kekmet. Activate it to start the sdrive shaft and the Conveyor. If you want the cutter to work fast, go for a higher RPM. However, that will be less conducive to a longer cutting session.

How to cut the Firewood in My Winter Car

Once you have completed all the steps mentioned earlier in the guide, take a log from the wood pile. Then, place it in the cutter slot. The log will automatically split the logs into pieces based on how high the RPM is. The Conveyor will automatically place the Firewood in the trailer (don’t forget to attach it).

The post How to use the Firewood Cutter in My Winter Car appeared first on Destructoid.